|
|
|
|
產品[
卡特泵潤滑油
]資料
如果您對該產品感興趣的話,可以
產品名稱:
卡特泵潤滑油
產品型號:
全系列
產品展商:
其它品牌
簡單介紹
美國CAT柱塞泵作為一種高壓泵（40bar-3000bar）被廣泛地應用于各個領域：海水淡化、紡紗噴霧增濕、切煙噴霧增濕、油田回注水、高壓水清洗、蛋白分離技術、濃縮液提取、園林景觀噴泉、噴霧、大田、大棚噴霧、液壓試驗、機械工具冷卻、卡特泵潤滑油。
卡特泵潤滑油的詳細介紹
卡特泵潤滑油Establishing a regular crankcase oil change schedule is one of the most important steps in preventative maintenance and to assure long pump life. Check for oil in the crankcase before starting your pump. Running your pump without oil will VOID Periodically inspect to assure the oil level is at the red dot or midpoint on the gauge.Remove the oil cap on the top of the crankcase and inspect for water or other contaminants in the oil.Change immediately, if discolored or contaminated.Change initial fill after 50 hours running period.
Change oil every 3 months or at 500 hour intervals thereafter.Pumps using wicks should be periodically lubricated through the access holes on the top front of the crankcase.See Tech Bulletin 024 on lubrication of the Lo-Pressure seals.Larger pumps often use oilers.Oilers should be filled at start-up and opened for a minimum of thirty minutes prior to start-up.Adjust drip rate after start-up according to operating cycle of pump.(Approximately 2-3 drops per hole per week for typical installation.) See Tech Bulletin 024.
|
|
