|
|
|
|
產品[
二氧化碳液體泵
]資料
如果您對該產品感興趣的話,可以
產品名稱:
二氧化碳液體泵
產品型號:
MC-2H
產品展商:
其它品牌
簡單介紹
二氧化碳液體泵是用于液體二氧化碳充裝系統的主要部件，其工作目的是將貯槽中的液體二氧化碳增壓后充入鋼瓶。它的性能穩定，操作容易，維護方便，啟動時間約為1分鐘，泵頭可獨立卸下，檢修后再裝上，此過程可在1小時內完成。簡捷優化的設計和精心的制造保證了長時間**可靠的運行。
二氧化碳液體泵的詳細介紹
The model MC-1044 pump incorporates the balanced 3-gear design to maximize efficiency and minimize slippage. The MC-1044 is reversible with proper consideration of inlet and outlet ports. The MC-1044 can fill up to three 100 lb. cylinders in 4 minutes using a manifold arrangement. As with all Smith pumps, no periodic maintenance or lubrication is required. Since the pump loading is balanced and no heavy rotor is utilized, the mechanical shaft seal ball bearing sees minimal work. It is sealed for life and does not require periodic greasing.
二氧化碳液體泵 PUMP SPECIFICATIONS | PUMPS ONLY | AVERAGE DELIVERY RATE GPM | MAXIMUM DIFFERENTIAL PRESSURE | INLET/OUTLET SIZE: FEMALE THREADED | MOTOR | PUMP ROTATION AS LOOKING AT PUMP SHAFT-END |
|---|
| MODEL | 40 PSID, 1800 RPM | 75 PSID, 1800 RPM | PSI | INCHES | H.P. |
|---|
| MC-1044 | 17 | 14 | 125 | 1-1/2 | 1-1/2 H.P. TO 40 PSID
2 H.P. OVER 75 PSID | REVERSIBLE | | MC-1044H | 30 | 25 | 125 | 1-1/2 | 2 H.P. TO 40 PSID
3 H.P. OVER 75 PSID | REVERSIBLE |
|
|
